877-846-7628
 

GS1714

Heat Treating & Multi-Purpose Furnace


The Perfect Little Tool Room Furnace
Ideal for Heat Treating, Glass and Ceramics

Program Control with Six Programs Included

The GS1714 is an excellent product for use in many applications. The control is a remarkably powerful multi-program control, the four sides of elements makes for a very even heating, the door is very easy to operate and the chamber is a very useful size - all for a very low price. These are built in a production line and are usually in stock for immediate shipment.

FEATURES

USES DYNA-GLOW CERAMIC ELEMENT HOLDERS:
Elements won't fall out of roof! The element holders are particularly important in the roof - they prevent dusting. 2350 Deg F - 1287 Deg C
FAST HEAT UP: Heats up to 2100 Deg F in less than one hour at 240 volts, less than 2-1/2 hours at 208 volts.
TIGHT GRADIENT UNIFORMITY: A nine point temperature uniformity survey demonstrates better than +/- 7-1/2 Deg F (a total variation of 15 Deg F) from corner to corner in the chamber from 500 Deg F to 2000 Deg F.
ELEMENTS ON TOP, SIDES AND BOTTOM.
DYNA-TROL AUTOMATIC PROGRAM CONTROL IS INCLUDED (Single Zone Version)
SPRING LOADED COUNTERBALANCED VERTICAL DOOR: Operates with one hand.
SLOT IN DOOR:You can work through the slot while opening and closing the door. Includes insulated plug. The slot is open at the bottom (it is a "U" shaped slot 2" wide by 3" high).
ON/OFF SWITCH
DOOR SAFETY SHUT OFF SWITCH
FIRST QUALITY INSULATING FIREBRICK: Firebrick has reflective ceramic coating - reduces dusting, aids brick life and increases operating efficiency. 3" firebrick on top (for extra strength), 2-1/2" on other surfaces.
WELDED STEEL CASE BENCH MOUNTED ON HEAVY DUTY BASE
FOUR LIFTING HANDLES
INCLUDES A CERAMIC HEARTH PLATE. Also includes ceramic standoffs to raise hearth plate above bottom elements.
POWER CORD INCLUDED: 30 amp Dryer Cord (NEMA 14-30P)
ELECTRICAL COMPONENTS ARE UL LISTED  
  • INSIDE DIMENSIONS: 17" (43 cm) wide by 12" (30.5 CM) high by 14-1/2" (37 cm) deep  
  • EXTERIOR DIMENSIONS: 26-1/8" (66.4 CM) wide by 31-1/4" (79.4 CM) high by 33-1/2" (85.1 CM) deep by 45" (114.3 CM) high with door open -
  • LOAD WEIGHT: 75 Pounds (34 KG)
  • SHIPPING DIMENSIONS: 44" (112 cm) by 36" (91 cm) by 36" (91 cm) high. This is a skidded carton.
  • SHIPPING WEIGHT: 425 Pounds Shipping Class is 85 -
  • FIRING CAPACITY: 1.7 cubic feet. 2958 cubic inches. .048 cubic meters
  • VOLTAGE: Designed to run on any voltage from 208 to 240 volts, single phase, 50/60 HZ.
  • WATTS at 240 Volts: 6000; AMPS at 240 Volts: 25.0
  • WATTS at 220 Volts: 5042; AMPS at 220 Volts: 22.9
  • WATTS at 208 Volts: 4507; AMPS at 208 Volts: 21.7
  • WATTS at 200 Volts: 4167; AMPS at 200 Volts: 20.9  
  • FOR ALL VOLTAGES FUSE THE KILN FOR 30 AMPS.

OPTIONS


This kiln is designed to operate properly on either 240 volts, 220, 208 or 200 volts (single phase only) with the same elements and electrical components. Will operate on either 50 or 60 HZ.
An angle iron stand is available. This will provide a hearth height of 40".


SPECIFICATIONS

MODEL
NUMBER
INTERIOR DIMENSIONS
208 VOLTS
240 VOLTS
CUBIC
FEET
SHIP
WEIGHT
 
W   x   H   x   D
K.W.
AMPS
K.W
AMPS
 
(LBS)
GS1714
17"  X 12"  X   14-1/2"
4.5
21.7
6.0
25.0
1.71
425

OPTIONS
  • Angle Iron Stand with Leveling Bolts
  • Honeywell Control System with DCP50 Program Control and UDC1200 High Limit
  • Automatic Vent System
  • Bartlett Overtemperature Control
  • KISS Software
  • Extra Ceramic Shelves 

OTHER SIMILAR FURNACES

OTHER BENCH FURNACES IN SIMILAR TEMPERATURE RANGE:

  • (XLB Series)2350F Bench Furnace -3 Sizes up to 12"W x 12"H x 36"D
  • (HB Series) 2200F Bench Furnace - 3 Sizes up to 12"W x 8"H x 36"D

PDF Brochures

Copyright © 2002, 2003 L&L Special Furnace Co., Inc.